Harting Crimp Tool 09 99 000 0501 Instruction Manual (1)

Instruction Manual for Crimp positioner tool 09 99 000 0501

General Information

Harting Crimp tool 09 99 000 0501

The tool has a double action ratchet. Nose
that the tool cannot be opened without
completing the cycle.
Preparation
1. Tool must be in open position.
2. Remove safety clip from positioner
guide.
3. Select positionier for contact to be
crimped.
4. Insert positionier into positioner guide
and turn 90 degrees until bayonet pins
lock.
5. Install safety clip into positioner guide
(optional).
6. Wire size and corresponding selector
number are shown on data plate.
7. With tool still in open position, raise
and rotate selector knob until number
indicated on data plate for wire size to
be crimped is in line with Sel.no.arrow.
8. To remove positioner remove safety
clip and reverse procedure described
in step 4 (four) above.

Harting Crimp positioning tool 09 99 000 0501 Instruction Manual (1)

Harting - Top Industrial Connectors Electronic Connectors Manufacturer in German