Han® Q Data RJ45 Technical characteristics

Features

• Combination connector
  - Ethernet connector based on RJ45
  - additionnally maximum 10 signal D-Sub contacts
• Compact design
• Crimp termination technology
• High contact density
• Turned D-Sub contacts of performance level1*
• Suitable for hoods and housings of series Han-Compact®

Technical characteristics

Ethernet connector
		4, shielded	8, shielded
Terminal		RJ45 accd. to IEC 60 603-7	RJ45 accd. to IEC 60 603-7
Wire gauge		AWG 24 - 22 flexible	AWG 26 - 24 flexible
		AWG 23 - 22 solid
Transmission features		Cat5e	Cat5e
Number of contacts		4, shielded	8, shielded
Control connector
Number of contacts		10
Electrical data acc. to DIN EN 61 984		5 A   50 V   0.8 kV   3
	Rated current	5 A
	Rated voltage	50 V
	Rated impulse voltage	0.8 kV
	Pollution degree	3
Contact resistance		> 1010 Ω
Material		Polycarbonate
Limiting temperatures		- 40 °C ... + 125 °C
Flammability acc. to UL 94		V 0
Mechanical working life - mating cycles		> 500

* Performance level 1 as per CECC 75 301-802, 500 mating cycles, 10 days 4 mixed gas test as per IEC 60 512


Harting - Top Industrial Connectors Electronic Connectors Manufacturer in German

Han® Q 17 Technical characteristics

Features

• 17 contact chambers taking the control contacts of the series Han D® (10A)
• Space-saving and compact design
• Leading protective ground
• Crimp terminal with standard Han D® contacts
• Use of standard tools
• Insert is suitable for the hoods and housings of the series Han-Compact®
• The contacts can be removed with the aid of a removal tool from the mating side

Technical characteristics

Specifications

DIN EN 61984 DIN VDE 0110 table 4 / table 2a for clearances and creepage-distances

 

Inserts

Number of contacts		17 + PE
Electrical data acc. to DIN EN 61 984		10 A   250 V   4 kV   2
	Working current	10 A
	Working voltage	250 V
	Impulse rated voltage	4 kV
	Pollution degree	2
Insulation resistance		> 1010 Ω
Material		Polycarbonate
Temperature range		- 40 °C ... + 125 °C
Flammability acc. to UL 94		V 0
Mechanical working life - mating cycles		> 500

 

Contacts

Material	Copper alloy
Surface
- hard-silver plated - hard-gold plated	3 µm Ag 2 µm Au over 3 µm Ni
Contact resistance
Crimp terminal	< 3 mΩ
- mm² - AWG	0,14 - 2,5 mm² 26 – 14

 

Plastic hoods/housings

Material	Polycarbonate RAL 9005
Locking element	Polyamide
Hoods/Housing sealing	NBR
Limiting temperatures	-40 °C / + 125°C
Degree of protection acc. to DIN EN 60529 for coupled connector	IP 65
Cable gland	Pg16, M25

 

Metal hoods/housings

Material	die cast zinc alloy
Locking element	V2A steel
Hoods/Housing sealing	NBR
Limiting temperatures	-40 °C / + 125°C
Degree of protection acc. to DIN EN 60529 for coupled connector	IP 65

 

Current carrying capacity

The current carrying capacity is limited by maximum temperature of materials for insert and contacts including terminals. The current capacity-curve is valid for continuous, not interrupted current-loaded contacts of connectors when simultaneous power on all contacts is given, without exceeding the maximum temperature.
Control and test procedures according to DIN IEC 60512-5.

(1) Wire gauge 0,5 mm²
(2) Wire gauge 1,0 mm²
(3) Wire gauge 1,5 mm²

Harting - Top Industrial Connectors Electronic Connectors Manufacturer in German

Han® Q 12/0 with PCB adapter Technical characteristics

Features

• PCB adapter for Han® Q 12/0
• Robust design
• Suitable for standard and EMC hoods and housings size Han® 3 A
• High contact density
• 12 contacts + PE to the PCB

Technical characteristics

Electrical data acc. to EN 61 984	7.5 A   250 V   4 kV   3
Rated current	7.5 A
Rated voltage	250 V
Rated impulse voltage	4 kV
Pollution degree	3
Insulation resistance	> 1010 Ω
Material	Polycarbonate
Limiting temperatures	-40 °C ... +125 °C
Flammability acc. to UL 94	V 0

Layout of PCB

Dimensions in mm
Recommended hole diameter: 0.8 mm

Assembly situation

Harting - Top Industrial Connectors Electronic Connectors Manufacturer in German

Han® Q 12/0 Technical characteristics

Features

• 12 contact chambers taking the control contacts of the series Han D® with crimp termination
• 1 PE contact with innovative Han-Quick Lock® termination technology
• 2 coding pins offering 16 coding possibilities
• Insert suitable for metal and plastic hoods and housings of the series Han® 3 A

Technical characteristics

Specifications	DIN VDE 0627 DIN VDE 0110 DIN EN 61 984
Inserts
Number of contacts	12 + PE
Electrical data acc. to DIN EN 61 984	10 A 400 V 6 kV 3
Rated current	10 A
Rated voltage	400 V
Rated impulse voltage	4 kV
Pollution degree	3
Pollution degree 2 also	10 A 400/690 V 6 kV 2
Termination Han D® contacts	Crimp
Termination PE contact	Han-Quick Lock®
Wire gauge PE contact	0.5 – 2.5 mm² AWG 20 – 14
Insulation resistance	> 1010 Ω
Material	Polycarbonate
Limiting temperatures	-40 °C ... +125 °C
Flammability acc. to UL 94	V 0
Mechanical working life	> 500 mating cycles
Contacts
Material	Copper alloy
Surface
- hard silver plated	3 μm Ag
- hard gold plated	2 μm Au over 3 μm Ni
Contact resistance	< 3 mΩ
Crimp termination
- mm²	0.14 – 2.5 mm²
- AWG	26 – 14
Maximum insilation cross section
- power contacts	ø = 5 mm
Plastic hoods/ housings
Material	Polycarbonate
Locking element	Polyamide
Flammability acc. to UL 94	V 0
Hoods/ housings seal	NBR
Limiting temperatures	-40 °C ... +125 °C
Degree of protection acc. to DIN EN 60 529 in locked position	IP 67
Metal hoods/ housings
Material	Die cast zinc alloy
Locking element	Steel galvanized
Hoods/ housings seal	NBR
Limiting temperatures	-40 °C ... +125 °C
Degree of protection acc. to DIN EN 60 529 in locked position	IP 44 IP 67 with sealing screw 09 20 000 9918

Harting - Top Industrial Connectors Electronic Connectors Manufacturer in German

Han® Q 8/0 Quick Lock Technical characteristics

Features

• Innovative Han-Quick Lock® termination technology
• Field assembly without special tools
• Compatible with Han® Q 8/0 standard inserts with crimp terminal
• Reduced wiring times
• Insert suitable for plastic hoods and housings of the sizes Han-Compact®
• Space-saving and compact design
• Leading protective ground contact

Technical characteristics

Specifications		DIN EN 60 644-1 DIN EN 61 984
Inserts
Number of contacts		8 + PE
Electrical data acc. to DIN EN 61 984		16 A 500 V 6 kV 3
	Rated current	16 A
	Rated voltage	500 V
	Rated impulse voltage	6 kV
	Pollution degree	3
Termination		Han-Quick Lock®
Insulation resistance		> 1010 Ω
Material insert		Polycarbonate
Material seal		NBR
Limiting temperatures		-40 °C ... +125 °C
Flammability acc. to UL 94		V 0
Mechanical working life		> 500 mating cycles
Contacts
Material		Copper alloy
Surface
- hard silver plated		3 μm Ag
Contact resistance		< 3 mΩ
Han-Quick Lock®
- mm²		0.5 – 2.5 mm²
- AWG		20 – 14
Maximum insilation cross section		ø = 3.6 mm
Plastic hoods/ housings
Material		Polycarbonate
Locking element		Polyamide
Flammability acc. to UL 94		V 0
Hoods/ housings seal		NBR
Limiting temperatures		-40 °C ... +125 °C
Degree of protection acc. to DIN EN 60 529 in locked position		IP 65

Current carrying capacity

The current carrying capacity is limited by maximum temperature of materials for insert and contacts including terminals. The current capacity-curve is valid for continuous, not interrupted current-loaded contacts of connectors when simultaneous power on all contacts is given, without exceeding the maximum temperature.
Control and test procedures according to DIN IEC 60512-5.
(1) Wire gauge: 0.5 mm²
(2)  Wire gauge: 1.5 mm²
(3)  Wire gauge: 2.5 mm²

Assembly Manual

Remove cable jacket and strip the fine stranded wires


Push fine stranded wires into the Han-Quick Lock® contact and push the blue slide with a screw driver1) until it comes to a stop

Removal Manual

Please insert the screw driver1) at an angle of 45° into the opening and lever the blue slide out

1) Screw driver: 0.4 x 2.5 mm or 0.5 x 3.0 mm


Harting - Top Industrial Connectors Electronic Connectors Manufacturer in German

Han® Q 8/0 with PCB adapter Technical characteristics

Features

• Robust design
• Suitable for Han-Compact® hoods and housings
• Low wiring costs
• High contact density

 

Technical characteristics

Number of contacts		8
Electrical data acc. to DIN EN 61 984		16 A   230 / 400  V  4 kV   2
	Rated curret	16 A
	Rated voltage conductor - ground	230 V
	Rated voltage conductor - conductor	400 V
	Rated impulse voltage	4 kV
	Pollution degree	2
Insulation resistance		> 1010 Ω
Material		Polycarbonate
Limiting temperatures		- 40 °C ... + 125 °C
Flammability acc. to UL 94		V 0
Mechanical working life - mating cycles		> 500

 

Layout of printed circuit boards

 

Assembly details

Harting - Top Industrial Connectors Electronic Connectors Manufacturer in German

Han® Q 8/0 Specifications

Features

• 8 contact chambers taking the Han E® power contacts
• Space-saving and compact design
• Leading protective ground
• Crimp terminal with standard Han E® contacts
• Use of standard tools
• Insert is suitable for the hoods and housings of the series Han® Q 8/0
• The contacts can be removed with the aid of a removal tool from the termination side
• DESINA conform product DESINA is a registered trademark
  

Specifications	DIN VDE 0627 Connectors and plug-and-socket devices DIN VDE 0110 table 4 / table 2a for clearances and creepage-distances DIN EN 61984
Approvals	UL,CSA

 

Inserts

Number of contacts		8 + PE
Electrical data acc. to DIN EN 61 984		16 A   500 V   6 kV   3
	Working current	16 A
	Working voltage	500 V
	Impulse rated voltage	6 kV
	Pollution degree	3
	- Pollution degree 2 also	16 A   400 / 690 V  6 kV   2
Working voltage acc. to UL/ CSA		600 V
Insulation resistance		> 1010 Ω
Material		Polycarbonate
Temperature range		- 40 °C ... + 125 °C
Flammability acc. to UL 94		V 0
Mechanical working life - mating cycles		> 500

 

Contacts

Material	Copper alloy
Surface
- hard-silver plated - hard-gold plated	3 µm Ag 2 µm Au over 3 µm Ni
Contact resistance	< 1 mΩ
Crimp terminal
- mm² - AWG	0,5 - 2,5 mm² partly loaded up to 4 mm² is possible 20 – 14

 

Hoods/Housings

plastic

Material	Polycarbonate RAL 9005
Locking element	Polyamide RAL
Sealing	NBR
Limiting temperatures	-40 °C / + 125°C
Flammability acc. to UL 94	V 0
Degree of protection acc. to DIN EN 60529 for coupled connector	IP 65

metal

Material	die cast zinc alloy
Locking element	V2A steel
Sealing	NBR
Temperature range	-40 °C...+ 125°C
Flammability acc. to UL 94	V 0
Degree of protection acc. to DIN EN 60529 for coupled connector	IP 65

 

Current carrying capacity

The current carrying capacity is limited by maximum temperature of materials for insert and contacts including terminals. The current capacity-curve is valid for continuous, not interrupted current-loaded contacts of connectors when simultaneous power on all contacts is given, without exceeding the maximum temperature.
Control and test procedures according to DIN IEC 60512-5.

Control and test procedures according to DIN IEC 512-3
(1) Wire gauge 2,5 mm²
(2) Wire gauge 1,5 mm²

Harting - Top Industrial Connectors Electronic Connectors Manufacturer in German

Han® Q 7/0 with PCB adaptor Technical characteristics

Features

• Robust design
• Suitable for standard and EMC housings
• Low cost wiring
• High contact density

Technical characteristics

Number of contacts		7
Electrical data acc. to DIN EN 61 984		7.5 A   250 V   4 kV   3
	Rated current	7.5 A
	Rated voltage	250 V
	Rated impulse voltage	4 kV
	Pollution degree	3
Material		Polycarbonate
Insulation resistance		> 1010 Ω
Limiting temperatures		- 40 °C ... + 125 °C
Flammability acc. to UL 94		V 0
Mechanical working life - mating cycles		> 500

Layout of printed circuit board

Assembly situation

Harting - Top Industrial Connectors Electronic Connectors Manufacturer in German

Han® Q 7/0 Specifications

Features

• 7 contact chambers for power contacts of the series Han D® (10 A)
• Crimp terminal with standard Han D® contacts
• Assembly with standard tools
• Compatible with hoods and housings of the series Han® 3 A
• The contacts can be removed with the aid of a removal tool from the termination side
• 6 fold coding by means of coding pins

Specifications

DIN VDE 0627 Connectors and plug-and-socket devices DIN VDE 0110 table 4 / table 2a for clearances and creepage-distances DIN EN 61984

Inserts

Number of contacts		7 + PE
Electrical data acc. to DIN EN 61 984		10 A   400 V   6 kV   3
	Rated current	10 A
	Rated voltage	400 V
	Rated impulse voltage	6 kV
	Pollution degree	3
Material		Polycarbonate
Insulation resistance		> 1010 Ω
Temperature range		- 40 °C ... + 125 °C
Flammability acc. to UL 94		V 0
Mechanical working life - mating cycles		> 500

Contacts

Material	Copper alloy
Surface
- hard-silver plated - hard-gold plated	3 µm Ag 2 µm Au over 3 µm Ni
Contact resistance	< 3 mΩ
Crimp terminal	0.14 - 2.5 mm² (AWG 26 - 14)
PE as screw terminal	2.5 mm² (AWG 14)

  Hoods/housings
plastic

Material	Polycarbonate
Locking element	Polyamide
Sealing	NBR
Limiting temperatures	-40 °C / + 125°C
Flammability acc. to UL 94	V 0
Degree of protection acc. to DIN EN 60529 for coupled connector	IP 65

metal

Material	die cast zinc alloy
Locking element	steel galvanized
Sealing	NBR
Temperature range	-40 °C...+ 125°C
Degree of protection acc. to DIN EN 60529 for coupled connector	IP 65

Current carrying capacity

The current carrying capacity is limited by maximum temperature of materials for insert and contacts including terminals. The current capacity-curve is valid for continuous, not interrupted current-loaded contacts of connectors when simultaneous power on all contacts is given, without exceeding the maximum temperature.
Control and test procedures according to DIN IEC 60512-5.

Wire gauge:
1 = 1.5 mm²
2 = 0.75 mm²


Harting - Top Industrial Connectors Electronic Connectors Manufacturer in German

Han® Q 5/0 Quick Lock Technical characteristics

Features

• Innovative Han-Quick Lock® termination technology
• Field assembly without special tools
• Compatible with Han® Q 5/0 standard inserts
• Reduced wiring times
• Insert suitable for all metal and plastic hoods and housings of the sizes Han® 3 A
• Vibration resistant

Technical characteristics

Protection degree	IP 65 / IP 67
Number of contacts	5 + PE
Electrical data accd. to DIN EN 61 984	16 A 230/400 V 4 kV 3
Rated current	16 A
Rated voltage conductor-ground	230 V
Rated voltage conductor-conductor	400 V
Rated impulse voltage	4 kV
Pollution degree	3
Termination	Han-Quick Lock®
Wire gauge	0.5 bis 2.5 mm² (AWG 20–14)
Insulation resistance	> 1010 Ω
Material	Polycarbonate
Flammability accd. to UL 94	V 0
Mechanical working life	> 500 mating cycles

Harting - Top Industrial Connectors Electronic Connectors Manufacturer in German

Han® Q 5/0 Specifications

Features

• 5 contact chambers for the power contacts of the series Han E® (16 A)
• Space-saving and compact design
• Leading protective ground with Screw terminal
• Crimp terminal with standard Han E® contacts
• Use of standard tools
• Compatible with metal and plastic hoods of the series Han® 3 A / 4 A
• The contacts can be removed with the aid of a removal tool from the termination side
• Degree of protection IP 65 2)

Specifications	DIN VDE 0627 Connectors and plug-and-socket devices DIN VDE 0110 table 4/table 2a for clearances and creepage-distances DIN EN 61984
Approvals	,

 

Inserts

Number of contacts		5 + PE
Electrical data acc. to DIN EN 61 984		16 A   230 / 400 V   4 kV   3
	Working current	16 A
	Working voltage conductor - ground	230 V
	Working voltage conductor - conductor	400 V
	Rated impulse voltage	4 kV
	Pollution degree	3
	- Pollution degree 2 also	16 A   320 / 500 V  4 kV   2
Working voltage acc. to UL/ CSA		600 V
Working voltage for wrap terminal acc. to CSA		2 A   30 V
Insulation resistance		> 1010 Ω
Material		Polycarbonate
Temperature range		- 40 °C ... + 125 °C
Flammability acc. to UL 94		V 0
Mechanical working life - mating cycles		> 500

 

Contacts

Material	Copper alloy
Surface
- hard-silver plated - hard-gold plated	3 µm Ag 2 µm Au over 3 µm Ni
Contact resistance	< 1 mΩ
Crimp terminal
- mm² - AWG	0,5 - 2,5 mm² 20 – 14

 

Plastic Hoods/Housings

Material	Polycarbonate RAL 7032
Locking element	Polyamide RAL 7032
Flammability acc. to UL 94	V 0
Hoods/Housings seal	NBR
Limiting temperatures	-40 °C / + 125°C
Degree of protection acc. to DIN EN 40050 for coupled connector	IP 651)

 

Metal Hoods/Housings

Material	die cast zinc alloy
Locking element	steel, galvanized
Hoods/Housings seal	NBR
Temperature range	- 40 °C...+ 125 °C
Degree of protection acc. to DIN EN 40050 for coupled connector	IP 44 1)

1) without washer

2) IP 65 will be achieved with sealing screw

 

Current carrying capacity

The current carrying capacity is limited by maximum temperature of materials for insert and contacts including terminals. The current capacity-curve is valid for continuous, not interrupted current-loaded contacts of connectors when simultaneous power on all contacts is given, without exceeding the maximum temperature.
Control and test procedures according to DIN IEC 60512-5.
Working current

Ambient temperature

(1) Wire gauge 2,5 mm²
(2) Wire gauge 1,5 mm²

Harting - Top Industrial Connectors Electronic Connectors Manufacturer in German

Han® Q 4/2 with PCB adapter Technical characteristics

Features

• Robust design
• Suitable for Han-Compact® hoods and housings
• Low wiring costs
• High contact density

 

Technical characteristics

Number of contacts		4/2 + PE
Electrical data acc. to DIN EN 61 984
Power area		30 A   400 / 690 V  6 kV   2
	Working current	30 A
	Working voltage conductor - ground	400 V
	Working voltage conductor - conductor	690 V
	Rated impulse voltage	6 kV
	Pollution degree	2
Signal area		7.5 A   250 V  4 kV   2
	Rated current	7.5 A
	Rated voltage	250 V
	Rated impulse voltage	4 kV
	Pollution degree	2
Insulation resistance		> 1010 Ω
Material		LCP
Limiting temperatures		- 40 °C ... + 125 °C
Flammability acc. to UL 94		V 0
Mechanical working life - mating cycles		> 500

 

Layout of printed circuit boards

 

Assembly details

Harting - Top Industrial Connectors Electronic Connectors Manufacturer in German