Monday, July 23, 2012

Han® Q 4/2 Technical details Specifications


Features
  • 2 power contacts Han D® 10 A
    4 signal contacts Han® C 40 A
  • Leading protective ground
  • Protection against contact with the fingers acc. to IEC 60 529
  • Insert is suitable for the hoods and housings of the series Han-Compact® (not suitable for 19 12 008 0501)
  • The power contacts can be removed with the aid of a removal tool from the termination side
  • 3 coding possibilities by using a coding pin instead of the fixing screw

Technical details
Specifications
DIN VDE 0627 Connectors and plug-and-socket devices
DIN VDE 0110 table 4/table 2a for clearances and creepage-distances
DIN EN 61 984
Inserts
Number of contacts 4/2 + PE
Electrical data
acc. to DIN EN 61 984

40 A   400/690 V   6 kV   3
Working current 40 A
Working voltage 400 / 690 V
Rated impulse voltage 6 kV
Pollution degree 3
Insulation resistance > 1010 Ω
Material Polycarbonate
Temperature range - 40 °C ... + 125 °C
Flammability
acc. to UL 94

V 0
Mechanical working life > 500 mating cycles
Han® C Contacts (Power contacts)
Material
Copper alloy
Surface
- hard-silver plated
5 µm Ag
Contact resistance
< 1 mΩ
Crimp terminal
- mm²
- AWG
2,5 - 6 mm²
14 - 10
Max. Insulation diameter
of single strand
5 mm

Plastic hoods/housings
Material
Polycarbonate RAL 9005
Locking element
Polyamide RAL 9005
Flammability acc. to UL 94
V 0
Hoods/Housing seal
NBR
Limiting temperatures
-40 °C / + 125°C
Degree of protection
acc. to DIN EN 60529
for coupled connector


IP 65
 
 
Current carrying capacity
The current carrying capacity is limited by maximum temperature of materials for insert and contacts including terminals. The current capacity-curve is valid for continuous, not interrupted current-loaded contacts of connectors when simultaneous power on all contacts is given, without exceeding the maximum temperature.
Control and test procedures according to DIN IEC 60512-5.

Wire gauge:
1= 2,5 mm²
2= 4 mm²
control contacts not under load


Harting - Top Industrial Connectors Electronic Connectors Manufacturer in German

0 comments:

Post a Comment