Features
- High current rated compact designed connector for hoods/housings size Han® 3 A
- Mating compatible to the axial screw version with 16 coding options
- Using of standard Han C crimp contacts and crimp tools wich allows a cost optimised production of high quantities
- For high voltages, please use heat shrink tube
- Finger protected male and female contacts
• By using in Han® 3 A HPR hoods/housings the sealing on the insert has to be removed.
Technical
characteristics
|
Inserts
|
|
| Number of contacts | 2 + PE |
|
Electrical data acc. to EN 61 984 |
40 A 830 V 6 kV 3
|
| Rated current | 40 A |
| Rated voltage | 830 V |
| Rated impulse voltage | 6 kV |
| Pollution degree | 3 |
| Insulation resistance | > 1010 Ω |
| Material | polycarbonate |
| Limiting temperatures | -40 °C ... 125 °C |
| Flammability acc. to UL 94 | V 0 |
| Mechanical working life | |
| - mating cycles | > 500 |
|
Contacts
|
|
| Material | copper alloy |
| Surface | |
| - hard-silver plated | 3 μm Ag |
| Contact resistance | ≤ 1 mΩ |
| Crimp termination | |
| - mm² | 1.5 ... 10 mm² |
| - AWG | 16 ... 8 |
|
Tools
|
see chapter 99 in the main catalogue „Industrial Connectors Han®“ |
|
Hoods/Housings
|
|
| Selection of hoods/housings | see Han® main catalogue chapter 30 / chapter 31 |
| Plastic hoods/housings | |
| Material | polycarbonate |
| Flammability acc. to UL 94 | V 0 |
|
Degree of protection acc. to DIN EN 60 529 for coupled connector |
IP 67 |
| Metal hoods/housings | |
| Material | zinc die-cast |
|
Degree of protection acc. to DIN EN 60 529 for coupled connector |
IP 44 IP 67 is achieved with seal screw 09 20 000 9918 |
Current Carrying Capacity
The current carrying capacity of the connectors is limited by the thermal
load capability of the contact element material including the connections
and the insulating parts. The derating curve is therefore valid for currents
which flow constantly (non-intermittent) through each contact element
of the connector evenly, without exceeding the allowed maximum temperature.Measuring and testing techniques according to DIN EN 60 512-5
(1) wire gauge: 2.5 mm²
(2) wire gauge: 4 mm²
(3) wire gauge: 6 mm²
(4) wire gauge: 10 mm²
Harting - Top Industrial Connectors Electronic Connectors Manufacturer in German
0 comments:
Post a Comment