Han® Q 5/0 Specifications

Features

• 5 contact chambers for the power contacts of the series Han E® (16 A)
• Space-saving and compact design
• Leading protective ground with Screw terminal
• Crimp terminal with standard Han E® contacts
• Use of standard tools
• Compatible with metal and plastic hoods of the series Han® 3 A / 4 A
• The contacts can be removed with the aid of a removal tool from the termination side
• Degree of protection IP 65 2)

Specifications	DIN VDE 0627 Connectors and plug-and-socket devices DIN VDE 0110 table 4/table 2a for clearances and creepage-distances DIN EN 61984
Approvals	,

 

Inserts

Number of contacts		5 + PE
Electrical data acc. to DIN EN 61 984		16 A   230 / 400 V   4 kV   3
	Working current	16 A
	Working voltage conductor - ground	230 V
	Working voltage conductor - conductor	400 V
	Rated impulse voltage	4 kV
	Pollution degree	3
	- Pollution degree 2 also	16 A   320 / 500 V  4 kV   2
Working voltage acc. to UL/ CSA		600 V
Working voltage for wrap terminal acc. to CSA		2 A   30 V
Insulation resistance		> 1010 Ω
Material		Polycarbonate
Temperature range		- 40 °C ... + 125 °C
Flammability acc. to UL 94		V 0
Mechanical working life - mating cycles		> 500

 

Contacts

Material	Copper alloy
Surface
- hard-silver plated - hard-gold plated	3 µm Ag 2 µm Au over 3 µm Ni
Contact resistance	< 1 mΩ
Crimp terminal
- mm² - AWG	0,5 - 2,5 mm² 20 – 14

 

Plastic Hoods/Housings

Material	Polycarbonate RAL 7032
Locking element	Polyamide RAL 7032
Flammability acc. to UL 94	V 0
Hoods/Housings seal	NBR
Limiting temperatures	-40 °C / + 125°C
Degree of protection acc. to DIN EN 40050 for coupled connector	IP 651)

 

Metal Hoods/Housings

Material	die cast zinc alloy
Locking element	steel, galvanized
Hoods/Housings seal	NBR
Temperature range	- 40 °C...+ 125 °C
Degree of protection acc. to DIN EN 40050 for coupled connector	IP 44 1)

1) without washer

2) IP 65 will be achieved with sealing screw

 

Current carrying capacity

The current carrying capacity is limited by maximum temperature of materials for insert and contacts including terminals. The current capacity-curve is valid for continuous, not interrupted current-loaded contacts of connectors when simultaneous power on all contacts is given, without exceeding the maximum temperature.
Control and test procedures according to DIN IEC 60512-5.
Working current

Ambient temperature

(1) Wire gauge 2,5 mm²
(2) Wire gauge 1,5 mm²

Harting - Top Industrial Connectors Electronic Connectors Manufacturer in German