Han® Q 8/0 Specifications

Features

• 8 contact chambers taking the Han E® power contacts
• Space-saving and compact design
• Leading protective ground
• Crimp terminal with standard Han E® contacts
• Use of standard tools
• Insert is suitable for the hoods and housings of the series Han® Q 8/0
• The contacts can be removed with the aid of a removal tool from the termination side
• DESINA conform product DESINA is a registered trademark
  

Specifications	DIN VDE 0627 Connectors and plug-and-socket devices DIN VDE 0110 table 4 / table 2a for clearances and creepage-distances DIN EN 61984
Approvals	UL,CSA

 

Inserts

Number of contacts		8 + PE
Electrical data acc. to DIN EN 61 984		16 A   500 V   6 kV   3
	Working current	16 A
	Working voltage	500 V
	Impulse rated voltage	6 kV
	Pollution degree	3
	- Pollution degree 2 also	16 A   400 / 690 V  6 kV   2
Working voltage acc. to UL/ CSA		600 V
Insulation resistance		> 1010 Ω
Material		Polycarbonate
Temperature range		- 40 °C ... + 125 °C
Flammability acc. to UL 94		V 0
Mechanical working life - mating cycles		> 500

 

Contacts

Material	Copper alloy
Surface
- hard-silver plated - hard-gold plated	3 µm Ag 2 µm Au over 3 µm Ni
Contact resistance	< 1 mΩ
Crimp terminal
- mm² - AWG	0,5 - 2,5 mm² partly loaded up to 4 mm² is possible 20 – 14

 

Hoods/Housings

plastic

Material	Polycarbonate RAL 9005
Locking element	Polyamide RAL
Sealing	NBR
Limiting temperatures	-40 °C / + 125°C
Flammability acc. to UL 94	V 0
Degree of protection acc. to DIN EN 60529 for coupled connector	IP 65

metal

Material	die cast zinc alloy
Locking element	V2A steel
Sealing	NBR
Temperature range	-40 °C...+ 125°C
Flammability acc. to UL 94	V 0
Degree of protection acc. to DIN EN 60529 for coupled connector	IP 65

 

Current carrying capacity

The current carrying capacity is limited by maximum temperature of materials for insert and contacts including terminals. The current capacity-curve is valid for continuous, not interrupted current-loaded contacts of connectors when simultaneous power on all contacts is given, without exceeding the maximum temperature.
Control and test procedures according to DIN IEC 60512-5.

Control and test procedures according to DIN IEC 512-3
(1) Wire gauge 2,5 mm²
(2) Wire gauge 1,5 mm²

Harting - Top Industrial Connectors Electronic Connectors Manufacturer in German