Han® Q 7/0 Specifications

Features

• 7 contact chambers for power contacts of the series Han D® (10 A)
• Crimp terminal with standard Han D® contacts
• Assembly with standard tools
• Compatible with hoods and housings of the series Han® 3 A
• The contacts can be removed with the aid of a removal tool from the termination side
• 6 fold coding by means of coding pins

Specifications

DIN VDE 0627 Connectors and plug-and-socket devices DIN VDE 0110 table 4 / table 2a for clearances and creepage-distances DIN EN 61984

Inserts

Number of contacts		7 + PE
Electrical data acc. to DIN EN 61 984		10 A   400 V   6 kV   3
	Rated current	10 A
	Rated voltage	400 V
	Rated impulse voltage	6 kV
	Pollution degree	3
Material		Polycarbonate
Insulation resistance		> 1010 Ω
Temperature range		- 40 °C ... + 125 °C
Flammability acc. to UL 94		V 0
Mechanical working life - mating cycles		> 500

Contacts

Material	Copper alloy
Surface
- hard-silver plated - hard-gold plated	3 µm Ag 2 µm Au over 3 µm Ni
Contact resistance	< 3 mΩ
Crimp terminal	0.14 - 2.5 mm² (AWG 26 - 14)
PE as screw terminal	2.5 mm² (AWG 14)

  Hoods/housings
plastic

Material	Polycarbonate
Locking element	Polyamide
Sealing	NBR
Limiting temperatures	-40 °C / + 125°C
Flammability acc. to UL 94	V 0
Degree of protection acc. to DIN EN 60529 for coupled connector	IP 65

metal

Material	die cast zinc alloy
Locking element	steel galvanized
Sealing	NBR
Temperature range	-40 °C...+ 125°C
Degree of protection acc. to DIN EN 60529 for coupled connector	IP 65

Current carrying capacity

The current carrying capacity is limited by maximum temperature of materials for insert and contacts including terminals. The current capacity-curve is valid for continuous, not interrupted current-loaded contacts of connectors when simultaneous power on all contacts is given, without exceeding the maximum temperature.
Control and test procedures according to DIN IEC 60512-5.

Wire gauge:
1 = 1.5 mm²
2 = 0.75 mm²


Harting - Top Industrial Connectors Electronic Connectors Manufacturer in German